Saltar al contenido principal


In this guide, we will use the binary provided in Astar release.

If you have experience with Rust compilation, you can also build the binary from here.

Let's get started

Let's start with updating our server. Connect to your server and update:

sudo apt-get update
sudo apt-get upgrade
sudo apt install -y adduser libfontconfig1

Create dedicated user and directory

Download the latest release from Github:

wget $(curl -s | grep "tag_name" | awk '{print "" substr($2, 2, length($2)-3) "/astar-collator-v" substr($2, 3, length($2)-4) "-ubuntu-x86_64.tar.gz"}')
tar -xvf astar-collator*.tar.gz

Create a dedicated user for the node and move the node binary:

sudo useradd --no-create-home --shell /usr/sbin/nologin astar
sudo mv ./astar-collator /usr/local/bin
sudo chmod +x /usr/local/bin/astar-collator

Create a dedicated directory for the chain storage data:

sudo mkdir /var/lib/astar
sudo chown astar:astar /var/lib/astar

Set systemd service

To run a stable collator node, a systemd service has to be set and activated. This will ensure that the node is restarting even after a server reboot.

Create a service file

sudo nano /etc/systemd/system/astar.service

Service parameters


Please make sure to change {NODE_NAME}

Description=Astar Archive node


ExecStart=/usr/local/bin/astar-collator \
--pruning archive \
--rpc-cors all \
--name {NODE_NAME} \
--chain astar \
--base-path /var/lib/astar \
--rpc-external \
--rpc-methods Safe \
--rpc-max-request-size 1 \
--rpc-max-response-size 1 \
--telemetry-url 'wss:// 0'



EVM RPC calls are disabled by default, and require additional flag to be enabled. Please refer to this page (INSERT_LINK) for more info.

Start the service:

sudo systemctl start astar.service

Check the node log to ensure proper syncing:

journalctl -f -u astar.service -n100

Enable the service:

sudo systemctl enable astar.service

You can test the node health through the RPC port with this command:

curl -H "Content-Type: application/json" --data '{ "jsonrpc":"2.0", "method":"system_health", "params":[],"id":1 }' localhost:9944

Next steps

For any usage, wait for the chain to be fully sync by checking the node log.

It all depends on what you plan to do with your archive node.

  • In most cases, you will want to access node from outside. In this case, nginx server is the recommended option.
  • If you run your dApp on the same server as the node, then you can access it directly with the localhost address. This setup is recommended for testing purpose only.
  • If you run the node locally for testing purpose, you can switch the network in Polkadot.js portal and explore the chain:


Extra operations

Get node logs

To get the last 100 lines from the node logs, use the following command:

journalctl -fu astar-collator -n100

Indexers and oracles

To access data from indexers (e.g. The Graph) or Oracles (e.g. Chainlink), you need to add the debug flags below to the node launch command, after the astar-collator line:


Upgrade node

When an upgrade is necessary, node operators are be notified in our Discord and Element group.

Download the latest release from Github

wget $(curl -s | grep "tag_name" | awk '{print "" substr($2, 2, length($2)-3) "/astar-collator-" substr($2, 3, length($2)-4) "-ubuntu-x86_64.tar.gz"}')
tar -xvf astar-collator*.tar.gz

Move the new release binary and restart the service:

sudo mv ./astar-collator /usr/local/bin
sudo chmod +x /usr/local/bin/astar-collator
sudo systemctl restart astar.service

Purge node

To start a node from scratch without any chain data, just wipe the chain data directory:

sudo systemctl stop astar.service
sudo rm -R /var/lib/astar/chains/astar/db*
sudo systemctl start astar.service


Please refer to the snapshot page. :::